Most facilities with both a washer-disinfector and an autoclave feed both machines from a single RO water treatment unit. Where a single water supply serves both pieces of equipment, one sample submitted against both Table 7.2 and Table 7.4 satisfies the full annual requirement under AS 5369:2023 — at a combined price that saves $495 compared to ordering the two tests separately.
One sample from your shared RO supply point covers this requirement. Your kit includes pre-labelled sample bottles, step-by-step collection instructions, and a priority courier number for same-day collection. Results are emailed as a NATA-accredited Certificate of Analysis reported against both Table 7.2 and Table 7.4 limits in a single document.
Not sure if this applies to your setup? If your washer-disinfector and autoclave have separate water supply points or separate RO units, use the individual Table 7.2 and Table 7.4 products. Contact us if you're unsure — we'll confirm before you order.
What this test covers: All AS 5369:2023 Table 7.2 parameters (washer-disinfector final rinse) and all Table 7.4 parameters (autoclave feedwater) reported in a single submission: pH · Conductivity · Total Hardness · Chloride · Iron · Reactive Phosphorus · Reactive Silica · Total Solids · Total Viable Count (TVC) · Bacterial Endotoxins (LAL) ≤0.25 EU/mL · Full heavy metals screen · Colour and appearance
When to order: Once per year, as required by AS 5369:2023. Also required on installation of new equipment or RO filtration system.
Most facilities with both a washer-disinfector and an autoclave feed both machines from a single RO water treatment unit. Where a single water supply serves both pieces of equipment, one sample submitted against both Table 7.2 and Table 7.4 satisfies the full annual requirement under AS 5369:2023 — at a combined price that saves $495 compared to ordering the two tests separately.
One sample from your shared RO supply point covers this requirement. Your kit includes pre-labelled sample bottles, step-by-step collection instructions, and a priority courier number for same-day collection. Results are emailed as a NATA-accredited Certificate of Analysis reported against both Table 7.2 and Table 7.4 limits in a single document.
Not sure if this applies to your setup? If your washer-disinfector and autoclave have separate water supply points or separate RO units, use the individual Table 7.2 and Table 7.4 products. Contact us if you're unsure — we'll confirm before you order.
What this test covers: All AS 5369:2023 Table 7.2 parameters (washer-disinfector final rinse) and all Table 7.4 parameters (autoclave feedwater) reported in a single submission: pH · Conductivity · Total Hardness · Chloride · Iron · Reactive Phosphorus · Reactive Silica · Total Solids · Total Viable Count (TVC) · Bacterial Endotoxins (LAL) ≤0.25 EU/mL · Full heavy metals screen · Colour and appearance
When to order: Once per year, as required by AS 5369:2023. Also required on installation of new equipment or RO filtration system.